Standards for determining flame retardancy



a) After any test sample is ignited, there should be no burning that spreads to the edge of the fabric or the upper end of the fabric. b) There should be no holes formed in any tes…

a) After any test sample is ignited, there should be no burning that spreads to the edge of the fabric or the upper end of the fabric.

b) There should be no holes formed in any test sample after ignition.

c) There should be no burning droplets or molten material falling in any test sample after being ignited.

d) The ignition delay time must be less than or equal to 2 seconds.

e) The smoldering time must be less than or equal to 2 seconds. Extended reading: https://www.yingjietex.com/product/1360D-Polyester-DOBBY -OXFORD-Fabric.html
Extended reading: https://www.alltextile. cn/product/product-55-115.html
Extended reading: https ://www.yingjietex.com/product/DE-23-Memory-Fabric.html
Extended reading: https://www.yingjietex.com/product/DOBBY-PONGEE-Breathable-Fabric.html
Extended reading: https://www.yingjietex.com/product/Polyester-Dobby-OXFORD-Fabric-4.htm

Author: clsrich

 
TOP
Home
News
Product
Application
Search