leno fabric design



Design of leno fabric 1. Raw materials: pure cotton, polyester/cotton and various chemical fibers (such as polyacrylonitrile fiber). 2. Spinning yarn requirements: In order to make…

Design of leno fabric

1. Raw materials: pure cotton, polyester/cotton and various chemical fibers (such as polyacrylonitrile fiber). 2. Spinning yarn requirements: In order to make the yarn holes clear and the fabric thin and refreshing, the warp and weft yarns must be even, with less cotton impurities and less hairiness. Generally, fine combed yarns are used and the twist is high. When twisting the warp yarn, it has to bear greater tension, so strands are often used. Since there are only one or a few weft yarns in the “yarn holes” of leno fabrics, they are easily broken when worn, so the weft yarns of leno fabrics should also have high strength. (1) Pure cotton yarn fabric: ground warp 13-21tex (28~45 English), twisted warp 13tex×2-21tex×2 (28 English×2~45 English×2), or both ground and twisted The same number of yarns or threads are used for the warps. (2) Polyester/cotton yarn fabric: The density of warp and weft spun yarn is 20%-30% lower than that of pure cotton yarn to maintain good breathability of the fabric. (3) Medium-thick leno fabric for decoration: Use 16.9tex×4 (35 English×4) polyacrylonitrile fiber yarn or wool-type viscose yarn, synthetic filament, etc. with corresponding special numbers. The fabric is rich and soft. Rich in imitation wool style or imitation silk style.

AAASDFERHYTJTI

Extendedreading:https://www.brandfabric.net/full-dull-dobby-print-pongee-breathable-fabric/
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【www.pctextile.com】 position, reproduced please specify the source.https://www.pctextile.com/archives/40268

Author: clsrich

 
TOP
Home
News
Product
Application
Search